Wednesday, September 14, 2011

Head gasket?

can any 1 tell me how easy it is to change the head gasket on a nissan micra gsx 1300 1989Head gasket?if you dont have access to the correct tools then very difficult as head bolts need to be torqued correctly. and u need to also set the timing belt correctly or bye bye engine. but with all tools and a good manual its reasonably straigt forwardHead gasket?first of all, you need to be a qualified mechanic with the right tools, and secondly you may not need to replace it if your cars only over heated they can sometimes just skim the top off.Head gasket?Hi there,

I agree with Corey, If you have to ask then maybe you shouldn't attempt the job. If your head gasket is leaking what has caused it to leak and you may need specialist machining services to skim the cylinder head if warped and this can only be checked using special tooling too.Head gasket?Try reading the Haynes manual for your car would be the first stage to see if you can tackle the job. Make sure you have a good tool kit to cover the job and allow plenty of time for any inspected problems. as said above by the others If its only a one off it would be easier to go to the garage Good luckHead gasket?normally, if you have to ask that question.... you prob shouldnt attempt it!Head gasket?as easy as changing your scocksHead gasket?Hi



If you're mechanically inclined then its basic straight forward Janet and John stuff. However, if you're not mechanically minded, or you just try your hand at the odd oil change now and again, then you should probably leave it to a man who can.



Very best regards



GeordieHead gasket?if you have to ask you will not be able to do it